No rotor rheometer 61-RTI100
It is a No rotor rheometer where rubber sample is enclosed in mold cavity, maintained at test temperature. The mold cavity comes in two parts, where lower part (swing oscillations) determines strain as the reaction torque of the mold cavity (force). The PID controlled microprocessor technology controls and detects change in temperature. LCD screen display the real vulcanization curve and temperature curve, adjust the test data, store test results.
| Temperature tester | Room temperature to 200°C |
| Temperature display resolution | 0.1°C |
| Temperature control accuracy | ≤ ± 0.3°C |
| Calibration accuracy | 100 times/ min |
| Die cavity frequency | 1.7 Hz |
| Sway angle | ± 0.5°, ± 1°, ± 3° |
| Air compression | 0.5 MPa to 0.65 MPa |
| Ambient temperature | 0 to 35°C |
| Test result | Printed date, time, temperature, vulcanization curve, temperature curve ML, MH, ts1, ts2, t10, t50, Vc1, Vc2 |
| Display | Windows 7 + software |
| Rotor range | 0 to 5 NM, 0 to 10 NM, 0 to 20 NM |
| Motor rotating speed | 0.001 NM |
| Speed accuracy | yes |
| Torque range | Date, time, temperature, vulcanization curve, temperature curve ML, MH, ts1, ts2, t10, t50, Vc1, Vc2 |
| Torque resolution | 1310×560×620 mm |
| Printer connection | 250 kg |
| Content printed | Single phase, 220 V ± 10%, 50 Hz |
| Weight | 1310×560×620 mm |
| Power supply | 250 kg |
- PID controlled microprocessor technology
- LCD Display
- Use of highly imported precision sensors
- Statistics, analysis, storage and comparison functions
- Can print automatic processing, calculations results
- Non curing viscometer monolithic rotor controlled
- User-friendly design appearance, easy to operate
- Supplied with data acquisition system
- Finds the vulcanization time for gelatin
No rotor rheometer is used to test vulcanization characteristics of rubber material across rubber industry for quality & research.
